URE-SEAL H2O Natural is a 2-part water reducible, crystal clear urethane. It is a high performance clear coating that can be used inside or out to protect any properly prepared concrete, pavers, or decorative concrete surface for years of service.
FEATURES AND BENEFITS:
- Excellent chemical resistance
- Low V.O.C.
- Interior and exterior use
- High performance
- Excellent UV resistance
- Low odor
- Easy clean-up
- May be applied to damp surfaces (no ponding or puddling)
ICT Ure-Seal H2O is a 2 component product that comes pre-packaged in 5 Gallon kits. If not all the product in
the kit is needed Ure-Seal H2O can be mixed by using 4 parts of “Part A” and 1 part of “Part B” (i.e.: 4 quarts of Part A to 1 quart of Part B) Do not mix more material than can be used in a 1-3 hour period. Once components A and B are mixed the pot life is approximately 1-3 hours. Pot life will vary based on weather conditions, temperature, humidity etc. Mixed product should NEVER be stored in a closed container. Do not intermix different batch’s.
Ure-Seal H2O cleans up easily with ICT Total Wash (760). Follow instructions on back label when using Total Wash (760). Sodium bicarbonate and water is also useful in removing Ure-Seal H2O residue from equipment immediately after application. Mix sodium bicarbonate and water at a ratio of 1 pound of sodium bicarbonate to 1 gallon of water and flush equipment thoroughly. Soap and water may also be used immediately after use.