Product Overview
COLOR ADDITIVE
Ure-Shades is a semi-transparent color additive designed for use in properly prepared Ure-Seal H2O. All surface preparation should be done according to the Ure-Seal H2O surface cleaning and preparation instructions located on the Ure-Seal H2O container and technical data sheet. Ure-Shades is low VOC. Container is 30 fl oz.
Ure Shades is a quick and easy way to restore color or recolor any properly prepared, cementitious substrates. Any surface that Ure-Seal H2O can be used is suitable for Ure Shades. Brick pavers, driveways, stamped concrete, faux rock waterfalls, interior floors, and more are perfect for Ure Shades and Ure-Seal H2O. The colors available match the existing color chart for Water Shades, semi-transparent water-based stain. Keep in mind that digital imaging will vary between devices and is meant to be used as a close representation but may not be exact.
Shades we stock: Brick Red, Red Clay, Saddle Tan, & Canyon Brown.
All others are special order. All Colors
Ure-Seal with Ure-Shades Mix Ratio
5 Gallons Ure-Seal + 5 Gallons of water = 10 Gallons
10 Gallons = 1,280 oz of Ready to Use Product
| Ure-Seal 4:1 + 1 Part Water | Ure-Shades | Measurement |
| 10 gallons Ure-Seal | Full Strength | 30 oz |
| 75% | 22.5 oz | |
| 50% | 15 oz | |
| 25% | 7.5 oz | |
| 10% | 3 oz |
