ICT Stone Show H2O Enhancer 2.5g

Spanish/Español

ICT Stone Show H2O Enhancer is a clear drying water-repellent with immaculate color enhancing properties. Stone Show H2O Enhancer has been specially formulated to be the ideal option for natural stones that must allow moisture to escape without allowing moisture the reenter through the non-film-forming barrier created by the proper installation of Stone Show H2O Enhancer. By disallowing the penetration of moisture, Stone Show H2O Enhancer will also help against other complications cause by the presence of water such as efflorescence, staining, spalling, and some cracking. Stone Show H2O Enhancer does not create a film over the surface and will not make the surface any more slippery than before application of Stone Show H2O Enhancer once excess has been removed. Stone Show H2O Enhancer will keep surfaces beautiful and protected. Longevity, which is typically around 12-24 months, and can last longer on porous surfaces, and will be determined by the amount of Stone Show H2O Enhancer that is absorbed into the substrate.

If color enhancement is not desire, use Stone Show H2O Invisible (171) instead.

FEATURES & BENEFITS

COVERAGE
Coverage rates will vary depending on substrate, textures, porosity, and application methods.
Porots, Texttred Strfaces — 75-125 sq. ft. per gallon
Semi-Porots Strfaces — 100-200 sq. ft. per gallon
Demse, Smooth Strfaces — 200-400 sq. ft. per gallon

More Information 

Designed to be used on

Safety Data Sheet

DO NOT apply ICT Stone Show H2O Enhancer when air or surface temperature is below 45°F or is expected to fall to the point before application is dry. Low temperatures and high humidity will effect drying and curing times.

DO NOT apply ICT Stone Show H2O Enhancer to new cement, mortar or grout. Allow these products to harden for a minimum of 0-4 days before application.