ICT Total Wash (760) is a specialty cleaner used to remove residue left behind by Ure-Seal H2O (150/151/152) from sprayers, brushes, roller covers, and other equipment.
Total Wash (760) is a concentrated, water-reducible solvent. It is safe to use on most commonly used pieces of equipment that may be used in the application of Ure-Seal H2O (150/151/152).
FEATURES & BENEFITS:
• Easily removes wet/damp Ure-Seal H2O residue
• Safe to use on most common tools and sprayers
• Can be filtered and re-used until Total Wash (760) is no longer clear
INSTRUCTIONS FOR USE:
When using Total Wash (760) to clean brushes, rollers covers, and other small pieces of equipment, soak items in Total Wash (760) until residue is able to be rinsed or wiped clean, no longer than 10-15 minutes. When cleaning a sprayer, first flush with warm water and sodium bicarbonate (baking soda). Then run Total Wash (760) through entire machine continuously for 3-5 minutes. Be sure to flush sprayer thoroughly afterwards with water to ensure that cross contamination does not occur. Total Wash (760) can be diluted, but should not exceed, 1:1 with water.
Note: Sprayers must have Viton O-rings to be able to use Total Wash (760). Total Wash (760) must be used immediately after completion of job. Do not allow Ure-Seal H2O to dry. Total Wash (760) will not remove dried Ure-Seal H2O!