Product Overview
URE-SEAL H2O Gloss is a 2-part water reducible, crystal clear Urethane. It is a high performance clear coating that can be used inside or out to protect and enhance any properly prepared concrete, pavers, or decorative concrete surface for years of service.
FEATURES AND BENEFITS:
- Non-yellowing
- Excellent chemical resistance
- Low V.O.C.
- Interior and exterior use
- High performance
- Excellent UV resistance
- Low odor
- Easy clean-up
- May be applied to damp surfaces (no ponding or puddling)
MIXING RATIO’S:
ICT Ure-Seal H2O is a 2 component product that comes pre-packaged in 5 Gallon kits. If not all the product in
the kit is needed Ure-Seal H2O can be mixed by using 4 parts of “Part A” and 1 part of “Part B” (i.e.: 4 quarts of Part A to 1 quart of Part B) Do not mix more material than can be used in a 1-3 hour period. Once components A and B are mixed the pot life is approximately 1-3 hours. Pot life will vary based on weather conditions, temperature, humidity etc. Mixed product should NEVER be stored in a closed container. Do not intermix different batch’s.
CLEAN UP:
Ure-Seal H2O cleans up easily with ICT Total Wash (760). Follow instructions on back label when using Total Wash (760). Sodium bicarbonate and water is also useful in removing Ure-Seal H2O residue from equipment immediately after application. Mix sodium bicarbonate and water at a ratio of 1 pound of sodium bicarbonate to 1 gallon of water and flush equipment thoroughly. Soap and water may also be used immediately after use.
Read more:
English
Spanish
Brazilian Portuguese
Safety Data Sheet:
SDS Part A
SDS Part B
